There are a number of times where the right tool will make a big difference. Most people have the basic repair tools of a hammer, screwdriver, drill driver, safety goggles, measuring tape, utility knife, work gloves, and a tool box. These items are great and even handy when working with plumbing but there are other tools out there if you are dealing with plumbing that you should be aware of.
The first tool that plumbers in Streamwood IL recommend that you are familiar with is a propane torch. For those out there that need to sweat copper pipes or fittings you might want to spend a little extra money and get a self-igniting torch head. These torch heads light at the simple squeeze of a trigger instead of making you deal with using a striker or even matches. The next tool that you should be familiar with would be tongue and groove pliers. Many people might know these pliers by the name channel locks. When a plumber needs to pull, grab, hold, twist, loosen, and tighten something the go to item that they have is the tongue and groove pliers. You may want to look at getting at least two different sized pliers the 10-in and the 12-in.
Plumbers in Chicago IL
The next tool that plumbers in Streamwood IL might recommend that you check out would be a hacksaw. A hacksaw will allow you to cut through any metal pipe that you might need to as well as any nuts, screws, plastic pipes, or bolts that might need to be taken care of. When one needs to use a hacksaw more often than not they are going to need a metal file as well. A metal file will help to remove any metal burrs and will help to smooth out edges of metal pipes after cutting. Generally when you are looking at metal files you will want to get a half-round which basically is round and flat. The other type of file would be a rat tail file which would be round and tapered. Depending on the type of project that you are working on will determine the type of metal file you will need.
There are a few wrenches that plumbers in Streamwood IL suggest that you have on hand when you are working with any type of plumbing. The three wrenches that you should be familiar with would be a basin wrench, pipe wrench, and an adjustable wrench. The Basin wrench is a wrench that you would use to tighten and loosen nuts that hold sink faucets into place. The reason that this wrench is so special is because the tool’s long shaft and swiveling jaw is able to reach into narrow and deep space located behind the sink and lock onto the these nuts. The next item would be a pipe wrench. You would use a pipe wrench to tighten and loosen threaded pipes, nuts, and fittings. Generally when you get a pipe wrench you will want to grab two of them. This will allow you to have one pipe wrench for turning and one pipe wrench for gripping and holding. You will want to be careful when you are working with a pipe wrench though. The serrated teeth will help you get a good grip but many times you will find that it will also damage the fixtures finish. There are times where you might be able to wrap a cloth around the wrench’s jaw to help prevent damage. The last type of wrench that you should have would be the adjustable wrench. The adjustable wrench is a very versatile tool that many plumbers turn to when they are working on compression fittings, hexed shaped nuts, and supply lines. You will want to make sure that when you are looking at the adjustable wrenches that you are looking at the ones that have a firm setting for the moving jaw this will allow you to know that it will not slip when there is some torque added. It is recommended that you try and get two different sized adjustable wrenches the 6-inch wrench for smaller areas and the 10-inch for the bigger area.
Plumbers in Lake in the Hills IL
One tool that plumbers in Streamwood IL think that every household should have is a plunger. No matter how bad you are at using tools a plunger can be used by almost anyone. Anytime there is a clog no matter if it is in the sink, toilet, tub, or floor drain the first step is almost always using a plunger. Now if you do find that the trusty plunger is not able to do the job you might want to invest in a hand auger. This is a tool that is sometimes referred to as a plumbers snake. You will basically hand crank drain cleaning tool that has about twenty five feet of flexible steel cable. This will allow most people to be able to clear out almost any drain. There is a word of caution though. If you do not use this tool right you may cause more damage to your piping and cause an even more expensive repair. There might be times where even this is not able to help a clogged drain which might be due to roots growing through your pipes which will mean that you will need a professional plumber anyways.
Plumbers in Huntley IL
There are only a couple more tools that plumbers in Streamwood IL feel that everyone should have that are going to do anything with plumbing. One of those tools would be the tubing cutter. The tubing cutter basically looks like a c clamp and is used to cut copper pipes. You will want to make sure that you get the standard size tubing cutter as well as the close-quarter mini-cutter. You should also look at investing in a fire-resistant cloth. This would be a specially treated clothe that is used to protect combustible surfaces that might be nearby when you are soldering with an open flame torch. You will also want to try to keep a fire extinguisher nearby as well.
There are some jobs out there that are better left to a professional to handle. For those that might not feel comfortable with the work that needs to be done or are not clear on how an item will need to be fixed should consider calling someone for help. This will help reduce the chance of a costly repair later and a lot of time and aggravation.
If you are currently looking for plumbers in Streamwood IL for any plumbing need feel free to give us a call at .