Plumbing Contractors in Wauconda IL Guide to Common Toilet Problems
There are five basic problems that people run into with their toilets. Understanding what those problems are will allow you to know if you are able to care of your problem on your own or if you are going to need the assistance of plumbing contractors in Wauconda IL. Knowing which problem you are dealing with will allow you to find the best solution for your individual situation.
The first problem that we are going to look at and that plumbing contractors in Wauconda IL see often is phantom flushing. This is where you may hear the toilet refilling even though no one has flushed it. The cause for this type of problem is usually caused by a slow leak in the tank that is generally caused from a damaged flapper or a flapper seat. The next question that you might have is how to fix this problem? The answer to that question would be to turn off the water to your toilet. You will then need to drain the tank and the bowl. You should be able to check the toilet’s flapper seat for any damage or wear that will cause the flapper to stop working properly. There are kits that you should be able to pick up at your local hardware store that will show you how to replace your current flapper seat with a new one. If you find that this is too complicated or you are not comfortable doing this type of repair you will want to make sure that you call in a professional to help you out. You will want to make sure that if at any time you do not feel comfortable with a repair it is best to call in an expert to ensure that the job is done right the first time and to avoid any costly mistakes.
Many plumbing contractors in Wauconda IL have been called because one flusher their toilet and nothing happens. The most common cause for this happening would be that the chain connecting the handle that you use to flush and the flapper the helps flush the toilet are not connected. This could mean that the chain is either not connected to the handle or is not connected to the flapper. To fix this type of problem you would need to take the lid off of the back of the toilet and see where the chain is not connecting. If you find that you are able to reconnect the chain you should be able to do that and test to make sure that the chain is not too long or too short to be able to flush the toilet or to make it continue to flush when it is not supposed to. You may need to replace the chain which is relatively easy to do. You will need to pick up a new chain at your local plumbing supply store and it should be pretty straight forward as to how it should be fixed.
Plumbing contractors in Wauconda IL deal with a number of toilets that have a weak flush. . This would be when you flush the toilet it does not remove all of the waste that it should. You might notice that your toilet bowl takes longer to empty than it would normally take you might be dealing with a weak flush. Generally you would be dealing with blocked holes that are located underneath the bowl’s rim. You should be able to clear any blockages that might be located in the flush holes. You should be able to take a piece of curved wire such as you would find with a wire coat hanger. You will want to make sure that you are gentle when you poke into the flush holes to remove anything that might be blocking them. Understanding that you need to be gentle so that you do not damage the siphon jet that is located underneath the drain is very important. You will take a chance of damaging those jets that could end up costing you a large amount in repairs or replacement of your toilet. You might find it more efficient and cheaper to have a professional plumber come in to help with the easy task to save money in the long run. There are some out there that might be comfortable with their repair skills enough that they are able to complete this type of repair.
The next common toilet problem that plumbing contractors in Wauconda IL deal with is the dreaded clogged toilet. There are a couple of causes for a clogged toilet and a few ways in which you should be able to repair it. The most common way of repairing a clogged toilet would be to take a plunger to the toilet. If you find that you are not able to fix the clogged toilet with a plunger you should be able to use a closet auger or a plumbers snake for really bad clogs. You will want to keep in mind that if used improperly a snake can cause more damage than a clogged drain. You are taking a chance of bursting a pipe. This is why many home owners opt to call in a professional plumber if they find that their plunger is not cutting it. You will also want to keep in mind that if your toilet is clogged that there might be other reasons for this. Making sure that you are familiar with the various items that should not be flushed is the key to reducing the chance of your toilet becoming clogged. For example there are some out there that might flush hair after cutting their hair or the hair left in a hairbrush this could cause your toilet to become clogged. There are many more examples out there if you look but knowing what should be flushed and what should not be flushed is very important.
If you are currently in need of plumbing contractors in Wauconda IL or any of the surrounding area feel free to give us a call at .